This converter converts Zernike terms in ISO 10110 3/A(B/C) tolerances. Please add the number of fringes, RMS or PV values for each Zernike term (n, m) combination below. Make sure all values are in the same unit [Fringes], [nm] or [um]. For the PanDao tool, the A(B/C) values in Fringes are needed. The result will only be an exact conversion for RMS values. For the two other types it's only a conservative estimation as they can't be exactly converted. To convert PV values into RMS, a factor of 4 can be used for a very rough estimation. The resulting tolerances are a bit stricter than specified with the Zernike terms. So if the resulting values are added to the PanDao tool, the resulting cost and chain should be rerun after the final ISO tolerances are assigned for fabrication.
Z(0,0):
Z(2,0):
Z(1,1):
Z(1,-1):
Z(4,0):
Z(3,1):
Z(3,-1):
Z(2,2):
Z(2,-2):
Z(6,0):
Z(5,1):
Z(5,-1):
Z(4,2):
Z(4,-2):
Z(3,3):
Z(3,-3):
Z(8,0):
Z(7,1):
Z(7,-1):
Z(6,2):
Z(6,-2):
Z(5,3):
Z(5-3):
Z(4,4):
Z(4,-4):
Z(10,0):
Z(9,1):
Z(9,-1):
Z(8,2):
Z(8,-2):
Z(7,3):
Z(7,-3):
Z(6,4):
Z(6,-4):
Z(5,5):
Z(5,-5):
Z(12,0):
Z(11,1):
Z(11,-1):
Z(10,2):
Z(10,-2):
Z(9,3):
Z(9,-3):
Z(8,4):
Z(8,-4):
Z(7,5):
Z(7,-5):
Z(6,6):
Z(6,-6):
Disclaimer:
Please counter-check the results. Despite thorough controls by our means, errors are possible. Use at your own risk(GTC applies).